Using 13.56 MHz contactless smart card technology, the iCLASS RK40 provides a powerful solution. Combine a contactless card presentation with a personal identification number (PIN) to support dual authentication of identity. Or, configure the panel for single-factor authentication, using only a card or a PIN.

The PIN can be verified either at the access control panel or locally by the keypad reader. When verified locally, the PIN must be programmed into the iCLASS card.

Featuring crisp architectural styling, the keypad reader has an elegantly curved faceplate. The 12-position weatherproof keypad uses discrete switches to provide positive tactile response, optionally reinforced by an audible tone. The keypad also features a waterproof silicone rubber boot, vandal-resistant metal keycaps, and backlit numbering.

Format Portability - Upgrading is completely transparent since the same Prox format and user identification numbers are brought across to your future iCLASS credentials, including HID Corporate 1000 formats. Secure - All RF data transmission between the card and reader is encrypted using a secure algorithm. By using industry-standard encryption techniques and advanced key management systems, iCLASS reduces the risk of compromised data or duplicated cards. Interoperability - iCLASS is based on international ISO interoperability standards providing compatibility with many popular card technologies (ISO 15693, ISO 14443A and ISO 14443B). Optimal Read Range Performance - An auto-tuning feature automatically adjusts the reader for optimal read range performance on any mounting surface.    OSDP Compliant - Bi-directional multi-dropped communication over RS485 link. For use only with OSDP compliant panels/hosts. Typical Maximum Read Range* 2-3.5" (5.0-8.9 cm) with HID iCLASS Card 1.5-2.0" (3.8-5.0 cm) with HID iCLASS Key 1.5-2.0" (3.8-5.0 cm) with HID iCLASS Tag 1.5-1.8" (3.8-4.5 cm) with HID iCLASS Prox 1-2" (2.5-5.0 cm) with MIFARE Card (serial number only) *Using ISO 15693 mode (except MIFARE). Dependent upon installation conditions. Please note that all iCLASS credentials are available in either a 2k bit (256 Byte) or 16k bit (2k Byte) configuration. Dimensions 3.30" x 4.80" x 0.9" (8.38 cm x 12.19 cm x 2.286 cm) Data Output Formats The keypad reader reads standard proximity format data from HID iCLASS® cards, and will output data as encoded. When reading MIFARE® cards, the keypad reader can be configured to output 26-bit, 32-bit, 34-bit, or 40-bit Wiegand formats based on the card serial number. Order RK40 Transit reader p/n 6139 to obtain Sony FeliCa™ IDm compatibility. Wiegand keypad data format can be configured for transmission of individual key presses as ASCII encoded Hex digits, or for buffering and transmission of the PIN as a card number in SIA 26-bit format with a configurable facility code.