Network Camera Hardware
System	• CPU: 32-Bit RISC Processor • ROM: 4MB Flash ROM • RAM 32MB SDRAM • Watchdog: Chip to monitor system voltage tolerance and abnormal program execution
Connectors	• One RJ-45 connector for Ethernet • One mini-DIN for RS-485/RS-232/GPIO/Video out • RS-485: for external Pan/Tilt (PT) device control • RS-232: for console connection • GPIO: for one fully opto-isolated alarm input and one relay output • Video out: for connecting to CCTV monitors, DVR, etc. • One internal microphone • One 12VDC jack • One DC-Iris power connector • Two LEDs to indicate network and power/system status
Video
Internal CCD Sensor	• 1/3” Sony interlaced color/monochrome CCD (Day/Night) • 0 Lux (F1.3) • Fixed IR cut filter
Lens	• Standard package: • CS mount (f) 7.5~50mm, F1.3~360 DC-Iris Lens
CCD Adjustment	• Backlight Control (BLC): on/off • Electronic Shutter (ES/AES): on/off • Day/Night (Color/Monochrome): on/off (below 5 Lux = mono, above 8 Lux = color)
Image Compression	• MPEG-4 Simple Profile (SP); JPEG; MJPEG
Video Adjustment	• Brightness, Contrast, Hue, Saturation, Frame rate, Bit rate (Constant Bit Rate (CBR), Variable Bit Rate (VBR) w/ quality levels), Group of Pictures (GOP) size, Frame Sequence (I-Frame, I-Frame/P-Frame), Interlaced/Progressive Scanning
Video Bit Rate	• 16K ~4M bits/sec (CBR/VBR configurable (high quality VBR settings for MJPEG can reach up to 10Mbps)
Resolutions	• Full D1 (4SIF): NTSC = 720x480; PAL = 720x576 • SIF: NTSC = 352x240; PAL = 352x288 • QSIF: NTSC = 176x 112; PAL = 176x144
Network
Network Interface	• 10/100 Base-T Ethernet
Protocols	• TCP(UDP)/IP, ICMP, HTTP, TFTP, FTP, Telnet, SMTP, DHCP, NTP, DNS, DDNS, RTSP, RTP/TCP(UDP)
Operating Environment
Operating Temperature	• 5° ~ 50°C (40° ~ 125°F)
Operating Humidity	• 20% ~ 80% RHG
Input Voltage	• AC 90V ~240V
Power Consumption	• < 8 watts
Mechanical Design
Dimensions	• 135(L) x 85(W) x 40(H) mm
Net Weight	• 0.57 kg (excluding power adapter)
Approvals	• CE / FCC
Management
Installation	• PiXORD IP Installer (Win32 Application)
Firmware Upgrade	• Remote upgrade via FTP • PiXORD Firmware Upgrade utility (Win32 Application) (available with future upgrade) • Customized Web UI is upgradeable via FTP and Telnet
Client PC Requirements	• Pentium 4 2.0GHz or equivalent • 512MB RAM • Microsoft Windows 98se/Me/2000/XP • Microsoft Internet Explorer 5.x or above • Microsoft DirectX 9.0c • Macromedia Flash 6 • MPEG-4 Software Codec
Security	• Multi-tiered access control for configuration
Recording	• Directly from Web UI while viewing the live video stream • PiXORDWare Recording Software – free 16-channel surveillance and configuration software